Edgar Cervantes / Android Authority
Have you ever seen those cool hexagon lights that YouTubers love to adorn their walls with? They look fantastic, and I always wanted some, but they can get a bit pricey. Thanks to the folks at Linkind, I finally got to test some, and the best part is that its EP6 Smart Hexagon Panels won’t break the bank. Let’s dive right in.
Setting things up
Edgar Cervantes / Android Authority
First things first, you have to get these lights installed. Let me start by warning you that this process is a bit tricky and time-consuming, but that’s true of basically all decorative smart lights. Making sure these are aligned perfectly and working properly takes patience, so make sure you keep your schedule clear for a while if you’re going to set up these awesome-looking lights. It took me about three hours to plan, install, and set up two sets of seven hexagon lights (so, 14 hexagon panels).
The good news is that the process becomes second-nature once you know what to do. Essentially, you’ll have to grab the cardboard alignment boards and tape them to the wall in the order you want the lights set up. There is an alignment tool included to help you get the angles right. Then, you’ll have to grab the bases, install the two-sided tape on them, and then use the other side of the tape to stick them to the wall, using the cardboard cutouts to put them all in place. Once all is set up, put the connectors in place, making sure all panels are linked. Also, make sure the power connections are hooked in; you’ll need one power brick per seven light panels. Also, make sure the controller is connected somewhere.
Once all that is done, you lock in the panels, connect the controller, and plug the brick (or bricks) into a wall outlet. If all goes well, they will light up, and you can connect to the system using the AiDot app. As you can see, this isn’t rocket science, but it takes careful alignment, patience, and a lot of repetition. Once you get in the zone, though, it is a simple process — it just takes time.
I liked that the power and controller connections can go anywhere, and the system figures things out on its own. The app will even recognize your pattern and let you customize its orientation for easier management. You can also easily expand your setup later. Simply add the new EP6 Smart Hexagon Panels and connect them to the current system. Each controller can manage up to 21 panels; again, you need a power brick per seven panels.
Here’s an essential piece of advice: Be careful with the connectors! They feel a bit fragile, and I damaged one of them in the process. Getting a replacement will be a time-consuming process. I can’t find them on sale, so you will likely have to contact support to get extras and then wait for them to ship.
Let there be light!
... continue reading