If you’ve ever tried to hook an old Nintendo 64 up to a modern HDTV, you know the results can be less than ideal. Assuming your original hardware still works and your flatscreen even has the requisite R/F and/or composite inputs to allow for the connection, the N64’s output will probably look like a blurry mess on a flatscreen that wasn’t designed with those old video signals as a priority.
The Analogue 3D solves this very specific problem very well, with a powerful FPGA core that accurately replicates a Nintendo 64 and well-made display filters that do a good job of approximating that cathode-ray tube glow you remember from decades ago. But the lack of easy expandability limits the appeal of this $250 device to all but the most die-hard fans of original N64 hardware.
A beauty to behold
As a piece of physical design, the Analogue 3D is a work of art. The gentle curves of its sleek black shell evoke the original N64 design without copying it, coming in at a slightly smaller footprint and height. Plus, there’s no ugly power brick.
Kyle Orland 3D COMPUTER GRAPHICS SYSTEM. 3D COMPUTER GRAPHICS SYSTEM. Kyle Orland Kyle Orland That power light in the center doubles as a Bluetooth sync button. That power light in the center doubles as a Bluetooth sync button. Kyle Orland Kyle Orland Top view. Top view. Kyle Orland That power light in the center doubles as a Bluetooth sync button. Kyle Orland Top view. Kyle Orland Kyle Orland Grippy rubber on the underside. Kyle Orland Rear view, including a look at the included SD card. Kyle Orland A comparison shot with my original, sticker-adorned N64.
This is a solidly built device, with a nice grippy underside and springy, elegant power and reset buttons. The shell has a lot of small, thoughtful touches, too, like a front power indicator that doubles as a Bluetooth sync button and lights on each controller port to indicate when a wireless controller is connected to that slot (the Hall Effect joysticks on 8bitdo’s wireless “64” controller are a joy compared to the crunchy mechanical sticks on your old N64 controller).
The one downside to this design is that the hardware can get slightly hot after running for a while, and it emits some noticeable fan noise when stressed. The welcome screen when you first boot the system recommends you give the vents adequate space to breathe, so be careful if you plan to place it directly on the carpet or something.