Tech News
← Back to articles

Loose wire leads to blackout, contact with Francis Scott Key bridge

read original related products more articles

11/18/2025

Page Content

​​​Blackouts led to loss of steering and propulsion on 984-foot-long vessel

WASHINGTON (Nov. 18, 2025) -- The NTSB said Tuesday that a single loose wire on the 984-foot-long containership Dali caused an electrical blackout that led to the giant vessel veering and contacting the nearby Francis Scott Key Bridge in Baltimore, which then collapsed, killing six highway workers.

At Tuesday’s public meeting at NTSB headquarters, investigators said the loose wire in the ship’s electrical system caused a breaker to unexpectedly open -- beginning a sequence of events that led to two vessel blackouts and a loss of both propulsion and steering near the 2.37-mile-long Key Bridge on March 26, 2024. Investigators found that wire-label banding prevented the wire from being fully inserted into a terminal block spring-clamp gate, causing an inadequate connection.

​Illustration showing how placement of wire-label banding affects the way wires are seated in their terminal blocks. (Source: NTSB)

After the initial blackout, the Dali’s heading began swinging to starboard toward Pier 17 of the Key Bridge. Investigators found that the pilots and the bridge team attempted to change the vessel’s trajectory, but the loss of propulsion so close to the bridge rendered their actions ineffective. A substantial portion of the bridge subsequently collapsed into the river, and portions of the pier, deck and truss spans collapsed onto the vessel’s bow and forwardmost container bays.

... continue reading