Skip to content
Tech News
← Back to articles

New Cambridge human brain-inspired chip could slash AI energy use — new type of memristor has roughly a million times lower switching current than conventional devices

read original get Memristor-based AI Chip → more articles
Why This Matters

The new Cambridge memristor technology, inspired by the human brain, promises to significantly reduce energy consumption in AI systems by operating at ultra-low switching currents. This advancement could lead to more efficient, sustainable, and powerful neuromorphic computing architectures, transforming how AI processes data and reducing environmental impact. Its improved uniformity and stability address longstanding reliability issues, paving the way for widespread adoption in next-generation devices.

Key Takeaways

Researchers at the University of Cambridge published a paper in Science Advances earlier this month describing a new type of hafnium oxide memristor. The highlight of the new technology is that it operates at switching currents roughly a million times lower than conventional oxide-based devices.

The team, led by Dr. Babak Bakhit from Cambridge's Department of Materials Science and Metallurgy, engineered a multicomponent thin film that forms an internal p-n junction, enabling the device to switch states smoothly at currents below 10 nanoamps while producing hundreds of distinct conductance levels.

Memristors are two-terminal devices that can store and process data in the same physical location, eliminating the energy-intensive data shuttling between separate memory and processing units in conventional computer architectures. Neuromorphic systems built from memristors could reduce computing power consumption by more than 70%, according to the paper.

Article continues below

Most existing HfO2-based memristors rely on filamentary resistive switching, where conductive paths grow and rupture inside the oxide. These filaments exhibit stochastic behavior, resulting in poor device-to-device and cycle-to-cycle uniformity that limits computational accuracy.

A different approach - adding strontium and titanium

The Cambridge team took a different approach by adding strontium and titanium to hafnium oxide and depositing the film in a two-step process, thereby creating a p-type Hf(Sr,Ti)O2 layer that self-assembles a p-n heterointerface with an underlying n-type titanium oxynitride layer. Resistance changes occur by shifting the energy barrier height at this interface rather than by growing or breaking filaments.

"Filamentary devices suffer from random behavior," Bakhit said in a Cambridge press release announcing the work. "But because our devices switch at the interface, they show outstanding uniformity from cycle to cycle and from device to device."

The devices demonstrated switching currents at or below 10-8 amps, retention exceeding 105 seconds, and endurance beyond 50,000 pulse-switching cycles. Using identical 1.0 V spikes comparable to biological neural signaling, the researchers achieved a conductance-modulation range exceeding 50 times across hundreds of distinct levels without saturation.

Stay On the Cutting Edge: Get the Tom's Hardware Newsletter Get Tom's Hardware's best news and in-depth reviews, straight to your inbox. Contact me with news and offers from other Future brands Receive email from us on behalf of our trusted partners or sponsors

... continue reading