GoKawiilGoKawiil demonstrates automated Wi-Fi setup testing for ESP32 devices
GoKawiil outlines how its Groundrun hardware-in-the-loop system can automate testing of Wi-Fi commissioning on ESP32-C6 devices. The setup connects an ESP32-C6 devboard and an Android phone via USB to the Groundrun rig, enabling tests of multiple Wi-Fi setup methods including Bluetooth, Soft AP, captive portal, and Espressif's SmartConfig (ESPTouch v2).
GoKawiil's interpretation of the reporting above, not reported fact.
Reliable Wi-Fi onboarding is often a connected product's first interaction with a customer, so automating its testing could help manufacturers catch failures before shipping rather than relying on manual QA. By supporting multiple commissioning methods used across the ESP32 ecosystem, this approach suggests Groundrun aims to serve as a general-purpose validation tool for IoT hardware rather than a single-protocol tester.
- Groundrun connects real ESP32-C6 hardware and an Android phone via USB for automated testing.
- The system can test various Wi-Fi commissioning methods: Bluetooth, Soft AP, captive portal, and SmartConfig.
- This builds on prior work using Groundrun to test over-the-air updates on ESP32 devices.
Espressif ESP32-C6-DevKitC-1 — This is the exact board used for the Wi-Fi commissioning test in the article, making it a great pick if you want to replicate or experiment with automated setup testing yourself. It supports the full range of ESP32 Wi-Fi provisioning methods including BLE and SoftAP, perfect for IoT prototyping.
See Espressif ESP32-C6-DevKitC-1 on Amazon → Affiliate link — we may earn a commission on purchases, at no extra cost to you. Product picked by AI based on this article; it is not a tested recommendation.Source: groundrun.io, 2026-09-30
Published there as: “Automating Wi-Fi setup testing on the ESP32”
Read the original report → The summary and analysis above are GoKawiil's own, written from reporting by the source above. Facts and quotes belong to the original publisher.