Skip to content
Tech News
← Back to articles

Modder fits 360mm AIO radiator inside Metabox gaming laptop, cuts temps 60°C

read original get Corsair iCUE H150i Elite 360mm AIO Cooler → more articles
GoKawiil Brief

YouTuber TrashBench rebuilt the cooling system of a Metabox P950EP laptop (Nvidia GTX 1060, Intel Core i7-8750H) by installing custom waterblocks, a new pump, and a cut-down 360mm AIO radiator mounted behind the screen. The mod lowered CPU and GPU temperatures by 60°C during benchmarks and stress tests, and allowed an average 14% overclock gain. The builder used 3D-printed mounts, epoxy, and thermal pads to fit the radiator and attach heatsinks to the RAM and VRMs, making the modification permanent.

Why It Matters

GoKawiil's interpretation of the reporting above, not reported fact.

The project illustrates how far enthusiasts will go to work around the thermal limitations inherent to compact laptop designs, which typically sacrifice cooling capacity for portability. While not a practical mainstream solution given its permanence and complexity, such extreme mods can highlight design constraints manufacturers face and may inspire more creative thermal engineering in future laptops.

Key Takeaways
Worth a Look

Corsair iCUE H150i Elite 360mm AIO Cooler — If you're inspired by extreme cooling mods like this laptop hack, a 360mm AIO cooler is a great way to bring serious thermal performance to a desktop build. It's the same category of hardware TrashBench repurposed for his laptop, giving you a taste of high-end liquid cooling without cutting anything apart.

See Corsair iCUE H150i Elite 360mm AIO Cooler on Amazon → Affiliate link — we may earn a commission on purchases, at no extra cost to you. Product picked by AI based on this article; it is not a tested recommendation.

Source: tomshardware.com — Jhet Borja, 2026-10-10

Published there as: “Crazed modder straps 360mm AIO radiator to laptop, cuts temps to below 40 degrees”

Read the original report → The summary and analysis above are GoKawiil's own, written from reporting by the source above. Facts and quotes belong to the original publisher.