General Atomics demonstrates helicon current drive in DIII-D tokamak
Researchers at General Atomics used a 30-element 'comb-line' antenna to beam 476 MHz radio waves into DIII-D tokamak plasmas, driving about 20 kA of current near the plasma core using roughly 370 kW of power sustained for a full second. Control tests using microwave heating of similar power produced no equivalent current, indicating the effect stems specifically from the radio-wave method rather than simple heating. The results, published in Physical Review Letters, mark the first successful demonstration of a technique that failed in experiments during the 1980s.
GoKawiil's interpretation of the reporting above, not reported fact.
Sustaining plasma current without relying on the central solenoid coil could let future fusion reactors run continuously rather than in bursts, which matters because a commercial fusion plant would need to operate like existing power plants that run for extended periods. The technique currently supplies only about 2% of the total plasma current demonstrated, so researchers would need to show it scales up substantially before it could replace solenoid-driven current in a working reactor. The revival of a decades-old idea also suggests that improvements in plasma conditions and antenna design, rather than new theory, were what made the difference.
- General Atomics demonstrated helicon current drive in the DIII-D tokamak using radio waves instead of a solenoid coil.
- The method drove about 20 kA of plasma current using 370 kW of radio-wave power, compared to roughly 1 MA total current in the plasma.
- The approach was attempted unsuccessfully in the 1980s and only worked now due to improved plasma conditions and a new antenna design.
Source: techspot.com — Zo Ahmed, 2026-11-11
Published there as: “A radio-wave trick from the 1980s could keep fusion reactors running continuously”
Read the original report → The summary and analysis above are GoKawiil's own, written from reporting by the source above. Facts and quotes belong to the original publisher.