Skip to content
Tech News
← Back to articles

SA-01 synth maker fixes power-loss audio click with added capacitance

read original get PCM5102A DAC Module Board → more articles
GoKawiil Brief

The developer of the SA-01 synthesizer spent about a year tracking down a clicking or thunking sound from the PCM5102A DAC's audio output whenever the device lost power. After ruling out the chip's built-in mute circuit as the cause, oscilloscope testing revealed the voltage spike occurred after the chip had already shut down, and adding bulk capacitance to the 3.3VA rail eliminated the noise. The fix, found with help from members of the Vancouver Hack Space, has now been built into the next mainboard revision.

Why It Matters

GoKawiil's interpretation of the reporting above, not reported fact.

The account illustrates how hardware debugging often requires disproving an obvious hypothesis (faulty muting) before finding the real cause through direct measurement. For small hardware makers, this kind of iterative, community-assisted troubleshooting can be essential to producing a polished product ready for production.

Key Takeaways
Worth a Look

PCM5102A DAC Module Board — If you're tinkering with synth audio stages like the SA-01, having a spare PCM5102A breakout board on hand is great for prototyping and testing mute/power-loss circuits without risking your main build. It's the same chip at the center of this power-loss click debugging saga, so it's perfect for experimenting with XSMT circuits yourself.

See PCM5102A DAC Module Board on Amazon → Affiliate link — we may earn a commission on purchases, at no extra cost to you. Product picked by AI based on this article; it is not a tested recommendation.

Source: subalpinecircuits.com, 2026-11-12

Published there as: “Chasing an audio artifact on power loss”

Read the original report → The summary and analysis above are GoKawiil's own, written from reporting by the source above. Facts and quotes belong to the original publisher.