Developer releases free self-hostable PancakeSlicer for non-planar 3D printing
A developer known as Alpaca Engineering released PancakeSlicer, a free, self-hostable slicing tool that lets 3D printers deposit material along curved, non-planar paths across all three axes rather than flat horizontal layers. The tool uses 3D models of specific print heads to calculate safe clearance angles and avoid collisions, and already supports a wide range of printers from brands including Bambu Lab, Prusa, Creality, and Voron.
GoKawiil's interpretation of the reporting above, not reported fact.
Non-planar printing has long been demonstrated in research settings but rarely used by hobbyists because existing slicers were hard to integrate into standard workflows, according to Alpaca Engineering. By packaging the technique into a familiar slicing and printer-management experience, PancakeSlicer could lower the barrier for everyday makers to experiment with curved, potentially stronger or smoother prints. Actual adoption will likely depend on how many printer models and print heads the project can support over time.
- PancakeSlicer is a free, self-hostable slicer enabling non-planar 3D printing on consumer hardware.
- It calculates clearance angles using 3D models of specific print heads to prevent collisions during printing.
- The tool already supports many popular printer brands, including Bambu Lab, Prusa, Creality, and Voron.
Prusa MK4S 3D Printer — If you're excited about experimenting with non-planar slicing techniques like PancakeSlicer, having a reliable and precise printer like the Prusa MK4S gives you a solid foundation to try advanced workflows. Its open ecosystem and strong community support make it easy to tinker with custom slicers and G-code adjustments. It's a great way to explore the cutting edge of 3D printing innovation highlighted in the article.”,
See Prusa MK4S 3D Printer on Amazon → Affiliate link — we may earn a commission on purchases, at no extra cost to you. Product picked by AI based on this article; it is not a tested recommendation.Source: tomshardware.com — Jhet Borja, 2026-11-15
Published there as: “3D printing dev’s free tool unlocks curved printing along all three axes”
Read the original report → The summary and analysis above are GoKawiil's own, written from reporting by the source above. Facts and quotes belong to the original publisher.