ULA says Vulcan booster underperformed after liftoff; engines not yet blamed
United Launch Alliance confirmed its Vulcan return-to-flight mission lost telemetry about 10 minutes in, after the first-stage booster showed low performance that caused stage separation at too low an altitude and speed to reach orbit. The company said the Centaur V upper stage and solid rocket boosters worked normally, and preliminary data reviewed by ULA and engine-maker Blue Origin suggests the fault may lie in propellant feed systems rather than the BE-4 engines themselves.
GoKawiil's interpretation of the reporting above, not reported fact.
The distinction matters because BE-4 engines also power Blue Origin's New Glenn rocket, which suffered its own failure in May tied to an engine valve issue; if Vulcan's problem is engine-related, it could raise fresh doubts about BE-4 reliability across both companies' rockets. Sources close to the investigation describe it as still early and 'incredibly complicated,' so the current lean toward a vehicle-side propellant issue should be treated as preliminary rather than conclusive.
- Vulcan lost telemetry roughly 10 minutes into its return-to-flight mission after low booster performance.
- Centaur V upper stage and solid rocket boosters reportedly performed normally during the flight.
- Preliminary data suggests the fault may involve propellant feed systems rather than the BE-4 engines, though the investigation is still early.
Source: arstechnica.com, 2026-11-17
Published there as: “The data is very preliminary, but Vulcan failure may not be due to BE-4 engines”
Read the original report → The summary and analysis above are GoKawiil's own, written from reporting by the source above. Facts and quotes belong to the original publisher.