GoKawiilHobbyist converts Razor A5 Lux push scooter to electric using a cordless drill
A maker documented converting a stock Razor A5 Lux push scooter into an electric vehicle by mounting a Hercules cordless drill to drive the front wheel through a keyed shaft and one-way bearings. The build used a welder, a 3D printer, and parts sourced from Harbor Freight, Amazon, and McMaster-Carr, relocating the drill's trigger to the handlebars for throttle control. The result tops out around 10mph and gets roughly two miles of range from a 5 amp-hour battery.
GoKawiil's interpretation of the reporting above, not reported fact.
The project illustrates a growing DIY trend of repurposing common power tools like cordless drills as cheap motors for personal mobility devices, rather than buying ready-made electric scooters. It also highlights real-world tradeoffs in improvised engineering, such as oversensitive throttle control and torque management, that commercial electric scooters are designed to avoid. Such builds could inspire other hobbyists to experiment with similar low-cost electrification projects using tools they already own.
- A cordless Hercules drill was repurposed to power the front wheel of a Razor A5 Lux scooter via a keyed shaft and one-way bearings.
- The build combined welding, 3D printing, and off-the-shelf parts from Harbor Freight, Amazon, and McMaster-Carr.
- The scooter reaches about 10mph and travels roughly two miles per 5 amp-hour battery charge, though throttle control remains imprecise.
Source: eddieabbondanz.io — Eddie Abbondanzio, 2026-10-14
Published there as: “I electrified my push scooter with a power drill”
Read the original report → The summary and analysis above are GoKawiil's own, written from reporting by the source above. Facts and quotes belong to the original publisher.