Scale-rich network metamaterials offer tunable density from micro to macro scale
Researchers fabricated and tested 'scale-rich' (SR) network microstructures using vat photopolymerization 3D-printing and two-photon lithography, comparing them to standard square, hexagonal and Voronoi lattices. They found SR designs with 500 ligaments achieve relative densities between 20% and 75% using 3D-printing, and even lower densities via two-photon lithography, while showing broader distributions of structural parameters than uniform lattices. The team then used finite-element homogenization to measure the resulting linear-elastic mechanical responses.
GoKawiil's interpretation of the reporting above, not reported fact.
The broader statistical spread in ligament length, connectivity and density seen in scale-rich lattices suggests these metamaterials could offer more finely tunable mechanical properties than conventional regular lattices, which are restricted to narrow or fixed density ranges. This could open design possibilities for materials engineered with site-specific stiffness or density, useful in applications needing graded or highly customized mechanical behavior, though practical use would depend on further mechanical characterization beyond the linear-elastic regime.
- Scale-rich microstructures show much broader distributions of structural parameters than square, hexagonal or Voronoi lattices.
- Fabrication combined 3D vat photopolymerization (centimetre-scale, ~100 μm resolution) and two-photon lithography (submicrometre features) to span a wide density range.
- Achievable relative densities ranged from about 20% to 75% with 3D-printing, extending lower using two-photon lithography.
Source: nature.com — Both, 2026-11-11
Published there as: “Scale-rich network-based metamaterials”
Read the original report → The summary and analysis above are GoKawiil's own, written from reporting by the source above. Facts and quotes belong to the original publisher.